The best performance in cracked concrete with the least installation effort.

Highbond anchor FHB II-A S

The fischer Highbond anchor FHB II-A S is a system component of the fischer Highbond-System FHB II. The force-controlled expanding composite anchor is ideal for fixing maximum loads in cracked and non-cracked concrete. The threaded rod can be used with approval either with the injection mortar FIS HB FIS HB or the resin capsules FHB II-P and FHB II-PF HIGH SPEED. The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances as well as thin concrete members. The low anchorage depth of the FHB II-A S reduces the drill and installation work. No drill hole cleaning is required for installation with the resin capsules. This allows a particularly economical and time-saving fixing.

Варианти на продуктите

Download of image data

Варианти на продуктите

Одобрения / Протоколи за изпитания

46 Варианти на продукта

Drill diameter

Drill hole depth

Anchorage depth

Max. fixture thickness

Thread

Width across nut

Легенда = Налично разрешение— = Разрешението не е налично

Повече резултати

Разгледан(и) 18 от 46 вариант(а)

Advantages

The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing.
With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required.
The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications.
The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.

Applications

Suitable for:

Guard rails
Façades
Staircases
Steel brackets
Masts
Rash protection
Steelwork constructions
Timber constructions

Ideal for:

Push-through installation

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15

Подробна информация за строителните материали можете да намерите в регистрационния документ.

Одобрения

ETA-05/0164
ETA-21/0948
DoP No. 0282
DoP No. 0293
DoP No. 0327
GS 3.2/16-352-1
(2103/12/12) - CM

Functionality

The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt.
The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 5

ETA Certification Document

pdf, ETA-05/0164

European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete

Създаден на 14.12.2017 г.

DOP - Declaration of Performance

pdf, DoP No. 0282

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded fastener for use in concrete)

Създаден на 19.01.2021 г.

ETA Certification Document

pdf, ETA-21/0948

European Technical Assessment for fischer Highbond-Anchor FHB II for diamond drilling / extended working life

Създаден на 09.09.2022 г.

DOP - Declaration of Performance

pdf, DoP No. 0327

Declaration of Performance for fischer Highbond-Anchor FHB II for diamond drilling / extended working life (Bonded expansion fastener for use in concrete)

Създаден на 16.09.2022 г.

DOP - Declaration of Performance

pdf, DoP No. 0293

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded expansion fastener for use in concrete)

Създаден на 03.01.2022 г.

Test report (fire protection)

pdf, GS 3.2/16-352-1

fischer Highbond anchors FHB II and FHB 11 lnject

Валиден от 07.02.2017 г.
до 06.02.2027 г.

Test report (fire protection)

pdf, (2103/12/12) - CM

lnjection systems FHB / FHB dyn / FDA

Валиден от 15.07.2021 г.
до 15.07.2026 г.

Filling Quantities

pdf,

Filling quantities für highbond-Anchor FHB II-A S

Load Table

pdf,

Highbond-Anchor FHB II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Installation Instructions

pdf,

fischer FHB II

Системни компоненти

Категории на подобни продукти

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	75 mm
Anchorage depth ( h_ef )	60 mm
Max. fixture thickness ( t _fix )	10 mm
Thread ( M )	M10
Width across nut	17 mm
Scale parts mortar	3
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209970720

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	75 mm
Anchorage depth ( h_ef )	60 mm
Max. fixture thickness ( t _fix )	100 mm
Thread ( M )	M10
Width across nut	17 mm
Scale parts mortar	3
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209972069

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	75 mm
Anchorage depth ( h_ef )	60 mm
Max. fixture thickness ( t _fix )	20 mm
Thread ( M )	M10
Width across nut	17 mm
Scale parts mortar	3
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209970737

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	75 mm
Anchorage depth ( h_ef )	60 mm
Max. fixture thickness ( t _fix )	60 mm
Thread ( M )	M10
Width across nut	17 mm
Scale parts mortar	3
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209970744

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	90 mm
Anchorage depth ( h_ef )	75 mm
Max. fixture thickness ( t _fix )	10 mm
Thread ( M )	M10
Width across nut	17 mm
Scale parts mortar	4
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4048962077964

Highbond anchor FHB II-A S

Варианти на продуктите

Предимства / Описание на продукта

Приложение и одобрение

Инструкции за монтаж

Документи за изтегляне

ETA-approval
Drill diameter ( d₀ )	12 mm
Drill hole depth ( h₀ )	90 mm
Anchorage depth ( h_ef )	75 mm
Max. fixture thickness ( t _fix )	10 mm
Thread ( M )	M12
Width across nut	19 mm
Scale parts mortar	4
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209972571

ETA-approval
Drill diameter ( d₀ )	16 mm
Drill hole depth ( h₀ )	110 mm
Anchorage depth ( h_ef )	95 mm
Max. fixture thickness ( t _fix )	100 mm
Thread ( M )	M16
Width across nut	24 mm
Scale parts mortar	8
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209972953

ETA-approval
Drill diameter ( d₀ )	25 mm
Drill hole depth ( h₀ )	190 mm
Anchorage depth ( h_ef )	170 mm
Max. fixture thickness ( t _fix )	50 mm
Thread ( M )	M20
Width across nut	30 mm
Scale parts mortar	26
Packaging	Folding box
Amount	4 pcs.
GTIN (EAN-Code)	4048962078305