The glass point holder for aesthetic fixing of laminated composite safety glass.

Zykon glass point fixings FZP G Z VSG

The glass point holder with for aesthetic fixing of laminated composite safety glass in suspended, back-ventilated façades.
Варианти на продуктитеDownload of image data

Варианти на продуктите

Одобрения / Протоколи за изпитания
4 Варианти на продукта
Min. panel thickness
Total length
Thread
Cylindrical diameter
Undercutdiameter
Amount
Легенда = Налично разрешение = Разрешението не е налично
Разгледан(и) 4 от 4 вариант(а)

Предимства / Описание на продукта

Advantages
  • The geometry of the anchor requires only a small drill hole diameter, allowing for a discreet and visually attractive fixing solution.
  • There is no need to drill through the glass façade panel to install the anchor. This adds more safety. The fastening point remains inside the façade panels and does not penetrate through to the outside. This reduces the danger of contamination and ensures a good seal.
  • Create an undercut drill hole and chamfer the edge of the drill hole in one work step.

Приложение и одобрение

Applications
  • Exterior façades
  • Interior façades
  • Glass façades
Building materials
  • Laminated composite safety glass (>18mm)
Подробна информация за строителните материали можете да намерите в регистрационния документ.
Одобрения
  • ETA-16/0302

Инструкции за монтаж

Functionality
  • Before glass hardening: use wet diamond drilling - first cylindrical, then conical - to drill an undercut hole.
  • After drilling the glass, the glass must be hardened before the undercut anchors can be set.
  • When the undercut anchor is set, an optimal, positive-locking connection is created between the expanding part and the drill hole.
Mounting Strip 1 Picture
1 / 7

Документи за изтегляне

European Technical Assessment for fischer FZP-G-Z for the rear fixing of structuran glass-ceramics
Създаден на 30.01.2017 г.
cd-blue-c6785f99-7cp4w